No. And that question is the entire problem with this one.

This post is a reference for the PHP2Shell vulnerability: what actually broke inside PHP, which servers are exposed, how to patch each common setup, how to prove the fix is really running, and which quick fixes give you false comfort. Keep it open while you work through your servers.

What happened: the PHP2Shell vulnerability in plain terms

PHP2Shell is the nickname researchers gave to two flaws in the PHP engine itself, CVE-2026-109618 and CVE-2026-109619. PHP rates both 9.2 on CVSS v4.0, and both can let an unauthenticated attacker run code on a web server. The name is the researchers’, not the PHP project’s.

The dates matter here, because they decide if you were exposed and for how long:

• 20 October 2026: PHP announced an emergency release for two critical issues. Details leaked publicly the same day.
• 21 October 2026: fixed releases shipped: PHP 8.5.12, 8.4.27, 8.3.36 and 8.2.35, with a full advisory.
• 23 October 2026: PHP published an informational advisory for a third, much narrower issue, CVE-2026-115560, with a one-line mitigation and no emergency release.

The flaws were reported by Wiz Research, Calif and OpenAI’s Codex Security team, who used AI models to turn long-standing weaknesses into working exploits. The affected code goes back to PHP 5.4, so effectively every PHP version from the last decade is in scope.

The two bugs, without the jargon

CVE-2026-109618 (out-of-memory corruption). PHP enforces memory_limit by aborting a request the instant it crosses the limit. If that abort lands while PHP is still building internal request data, for example while parsing a multipart file upload, the data is left half-initialized. Request cleanup then treats it as valid and works with memory that can still hold attacker-controlled leftovers.

CVE-2026-109619 (stale global state). Some state owned by one request can survive after its memory has been freed, for example after a fatal error. The next request handled by the same worker can use that stale state before normal setup resets it.

Here is why this is worse than the usual plugin CVE. The bug lives in the runtime, not in your code. A site whose own code is flawless is still exposed, and updating WordPress, Laravel or Drupal changes nothing, because the PHP binary underneath comes from your OS packages, your host or your container image. The researchers also demonstrated reading memory from the PHP worker process, which can contain passwords, tokens and keys belonging to other people’s requests, without ever getting a shell.

Who is exposed, and why mod_php is the worst case

PHP’s advisory covers every installation that serves web requests: PHP-FPM, Apache with mod_php, php-cgi, FrankenPHP and LiteSpeed. The risk is not equal across them, though.

mod_php is the highest risk. Apache with mod_php runs request shutdown even when request startup already failed. That means simply running out of memory while PHP parses the request body is enough, and one unauthenticated request can trigger the attack before a single line of your application runs. PHP demonstrated this with default memory and input limits.

PHP-FPM is harder to hit, not safe. FPM shuts the worker down when a request fails early in setup, which blocks the cleanest path. Public reporting says one of the two bugs was still shown to reach code execution under FPM, through a path that depends on something the application does. Treat “we run FPM” as “we have slightly more time,” nothing more.

If you are not sure which mode you run, these two checks answer it on most Linux servers. The first lists Apache modules and shows a PHP module only if mod_php is loaded. The second lists running FPM services.

apachectl -M | grep -i php
systemctl list-units --type=service | grep -i fpm

How to fix PHP2Shell: it depends on where your PHP comes from

The fix is always the same in principle: run a patched PHP build. Getting there depends entirely on who builds your PHP. And there is a trap that runs in both directions. Linux distributions and long-term-support vendors received the patch early and backported it, so a patched package can carry an old-looking version like 8.3.6. Meanwhile, an unpatched process can keep running after the package updated. The version string answers neither question reliably.

Debian and Ubuntu packages

Debian, Ubuntu and Ondřej Surý’s widely used repository (packages.sury.org, also published as ppa:ondrej/php) all shipped fixed packages, including builds for some end-of-life branches. Update normally, then confirm the CVE is in the package changelog instead of reading the version number. Replace 8.3 with your branch.

sudo apt update && sudo apt upgrade
zgrep CVE-2026-109618 /usr/share/doc/php8.3-common/changelog.Debian.gz
sudo systemctl restart php8.3-fpm
sudo systemctl restart apache2

If zgrep prints a line, the fix is in the installed package. If it prints nothing, you are either on an older distro release that needs a paid extended-support channel, or on a repository that has not shipped the fix.

RHEL, AlmaLinux and Rocky Linux

Same idea with RPM. Update, then search the package changelog for the CVE. If you use Remi’s parallel packages, the package name follows its own pattern (for example php83-php-common), so query that name instead.

sudo dnf upgrade 'php*'
rpm -q --changelog php-common | grep CVE-2026-109618
sudo systemctl restart php-fpm httpd

One warning from PHP’s own advisory: the volunteer-run rpms.remirepo.net repository was not expected to have updates on release day, and PHP suggested switching to distribution packages or building from source if you depend on it. Check before assuming the update landed.

cPanel, CloudLinux and LiteSpeed

cPanel ships its own ea-php packages through EasyApache 4, and CloudLinux ships alt-php. CloudLinux backported the fix into supported and end-of-life branches, so most of its fixed builds keep version numbers below the php.net release. CloudLinux’s published procedure is to update both package families, then restart the services that run PHP so no worker keeps the old binary loaded.

yum clean all && yum update 'alt-php*' 'ea-php*' -y
/scripts/restartsrv_httpd

If your domains run PHP-FPM through cPanel, restart the FPM service as well. On LiteSpeed, restart the web server so every lsphp process respawns from the new build. Public analysis says LiteSpeed’s LSAPI behaves more like FPM than mod_php, which buys time but does not remove the need to patch.

DirectAdmin with CustomBuild

CustomBuild compiles PHP from source, so you get the fix when CustomBuild offers the patched release and you rebuild. Refresh the version list, confirm the fixed release appears for each PHP version you run, then build.

cd /usr/local/directadmin/custombuild
./build update
./build versions
./build update_versions

Read the ./build versions output before running the last command. If a branch you use still shows an unpatched release, apply the mitigations below for that branch until it updates. Compiling takes a while on small servers, so plan for it rather than starting it at peak traffic.

Docker and container images

A container never patches itself. If your image is built FROM an official php tag, rebuild with a fresh pull of the base image and redeploy. If your Dockerfile pins the base by digest, the digest has to change or nothing happens.

docker compose build --pull
docker compose up -d

Then run php -v inside the running container, not on the host, to confirm the version the app actually uses.

Managed hosting versus unmanaged VPS

On managed hosting, the host owns the PHP runtime, and several large hosts announced they had patched their fleets. Your job there is to get written confirmation, not to assume. On an unmanaged VPS from Contabo, Interserver or any similar provider, nobody patches PHP but you. That is the trade you accepted for the lower price and full root access, and this week is when it gets collected.

End-of-life PHP: 8.1 and older

The PHP project released no fixed builds below 8.2. Because of the severity, its security team published minimal source backports for PHP 7.4, 8.0 and 8.1 for people who build from source. Beyond that, your options are a distribution or vendor that backports (Ubuntu’s own PHP 8.1 on 22.04, the Surý repository, Freexian ELTS for older Debian, CloudLinux and TuxCare, HeroDevs), or upgrading. Note that PHP 8.2 itself reaches end of life on 31 December 2026, so if you are touching an 8.2 server now, plan the next upgrade at the same time.

Prove the patch is actually running

This is the failure mode that will bite most people. The package manager says “upgraded,” the ticket gets closed, and the old PHP code keeps serving traffic because the processes that loaded it were never restarted. Linux happily keeps running a binary whose file has been replaced on disk.

1. Confirm the fix is in the package with the changelog check above, not the version string.
2. Restart everything that runs PHP: every FPM pool, Apache (for mod_php), LiteSpeed, and any long-running PHP workers such as queue consumers managed by Supervisor or systemd.
3. Check the restart time is after the upgrade. systemctl status php8.3-fpm shows when the service started. If that is earlier than your package install, it is still running old code.
4. Ask the system what still needs a restart. On Debian and Ubuntu, sudo needrestart -r l lists services still using outdated files, without restarting anything.
5. Check the right binary. php -v on the command line reports the CLI build, which can differ from the FPM build serving your site. On Debian and Ubuntu, php-fpm8.3 -v asks the FPM binary directly.

Mitigations if you cannot patch today, and what they don’t do

PHP is blunt about this: only an update is a complete fix. The settings below reduce exposure to the specific attack paths it has confirmed. They do not make a server safe, and some of them have real costs. Use them to buy hours, not weeks.

Set them where applications cannot override them: php_admin_value or php_admin_flag in the FPM pool, or the Apache configuration for mod_php. Do not rely on ini_set() or an FPM .user.ini file, because those apply too late in the request. Here is the FPM pool version on a Debian-style path (adjust the file and branch to yours):

; /etc/php/8.3/fpm/pool.d/www.conf
php_admin_value[memory_limit] = -1
php_admin_value[post_max_size] = 8M
php_admin_value[upload_max_filesize] = 6M
php_admin_flag[session.upload_progress.enabled] = off

And the Apache equivalent for mod_php, inside the virtual host or a Directory block:

php_admin_value memory_limit -1
php_admin_value post_max_size 8M
php_admin_value upload_max_filesize 6M
php_admin_flag session.upload_progress.enabled off

Restart every worker afterwards. Now the reasoning behind each line, because each one protects a different path:

• memory_limit = -1 targets CVE-2026-109618. The confirmed exploit needs a predictable per-request limit to hit, so removing the limit removes the trigger. The cost: one request can now consume all available memory. A genuine allocation failure can also still reach the vulnerable code.
• Low post_max_size shrinks the request bodies an attacker can use. PHP suggests 8M where uploads are not needed and 32M where they are, with upload_max_filesize kept below it.
• session.upload_progress.enabled = off targets CVE-2026-109619. It blocks the confirmed session paths but not other variants. It does nothing at all for CVE-2026-109618.
• On PHP 8.5 only, fatal_error_backtraces = off blocks the confirmed fatal-backtrace path for CVE-2026-109619, and nothing else.

Because removing the memory limit opens a denial-of-service risk, PHP recommends a container or cgroup memory limit as the availability boundary, ideally one that kills only the affected worker. It specifically warns against RLIMIT_AS or RLIMIT_DATA, since those make allocations fail at the limit, which is exactly the condition the bug needs. Enforcing request-size, field-count and multipart-part limits at your reverse proxy helps too.

A web application firewall is a reasonable stopgap, not a fix. Cloudflare deployed rules before the patch shipped and reported attackers changing payloads to get around them. If your site already sits behind Cloudflare, those rules help. They do not replace the update.

The third issue: CVE-2026-115560

Two days after the release, PHP disclosed one more possible code-execution path. It needs an unusual setup: the application sets session.serialize_handler to php_binary or php_serialize in configuration, then switches it to php at runtime with ini_set() before calling session_start(), with session upload progress still enabled. The fixed releases above do not cover it. PHP’s advice is to keep session.upload_progress.enabled=0 until the next regular bugfix release. If you already set it for CVE-2026-109619, leave it in place and you are done.

After patching: assume someone tried

Amazon reported a honeypot hit against these flaws on 17 October, four days before disclosure, and exploitation attempts climbed fast once details were public. Most reports so far describe scanning and failed attempts rather than confirmed break-ins, but “nobody has reported it” is not evidence about your server. If you ran an unpatched, internet-facing PHP site during that window, do three things.

• Rotate secrets a PHP worker could have held in memory: database passwords, API keys, payment provider keys, SMTP credentials and, for WordPress, the salts in wp-config.php (which logs every user out, so warn people first).
• Read your logs for the patterns researchers flagged: unusual multipart requests followed by memory-limit errors or bursts of HTTP 500 responses, oddly large PHPSESSID cookies in responses, and PHP workers restarting with no explanation.
• Look for anything new and executable in your web roots and upload directories, especially PHP files that no deploy put there.

Troubleshooting

“php -v still shows the old version.” Either it is a distro backport (check the changelog for the CVE), or you are looking at the CLI binary while a different build serves the site. Check the FPM binary directly and the container, not the host.

“The site throws 500 errors after the update.” The fix changes how PHP handles running out of memory. Crossing memory_limit now raises a soft error at a safe point, and a second, higher threshold ends the process outright, without running shutdown handlers. A plugin or import job that used to squeak by can now fail differently. Check the error log, then review memory_limit and post_max_size against what the application genuinely needs.

“Cleanup or logging code stopped running on big jobs.” Same cause. If anything important lives in a shutdown function, it will not run when the hard limit is hit. Fix the memory usage rather than raising limits blindly.

“The package manager says there is nothing to update.” You are probably on a repository that has not shipped the fix, an end-of-life distro release, or an end-of-life PHP branch with no vendor backport. That is a migration problem, not a patching problem.

“I set the mitigation but the old value still shows.” Look for overrides in other pool files, per-directory configuration or application code, and make sure you used the admin variants and restarted the workers.

Common mistakes

• Updating WordPress, plugins or the framework and calling it done. None of that touches the PHP runtime.
• Trusting the version number in either direction, and declaring a backported package “vulnerable” or a stale process “patched.”
• Upgrading the package and never restarting FPM, Apache or long-running workers.
• Treating session.upload_progress.enabled=0 as the fix. It was circulated as a workaround before the release and only covers part of one CVE.
• Setting mitigations with ini_set(), .htaccess overrides that apps can change, or .user.ini, which take effect too late.
• Leaving memory_limit=-1 in place long after patching, with no cgroup boundary behind it.
• Forgetting the boxes nobody owns: the staging server, the old client site on PHP 7.4, the forgotten container in a side project.

Best practices

• Keep an inventory of every PHP install, its source (distro, panel, container, source build) and its branch. This week shows why.
• Verify fixes by CVE in the package changelog, and verify the running process by start time.
• Patch mod_php servers first, then public FPM sites, then internal tools.
• Once patched, restore a sane memory_limit, but keep session upload progress off until PHP’s next regular release covers CVE-2026-115560.
• Move servers off mod_php to PHP-FPM where you can. It would not have saved you here, but it narrowed the easiest path.
• Stay on a supported PHP branch, or pay for a vendor that backports. An unsupported branch turns every emergency into a migration.

FAQ

What is the PHP2Shell vulnerability?

It is the nickname for two memory-safety flaws in the PHP engine, CVE-2026-109618 and CVE-2026-109619, both rated 9.2 on CVSS v4.0. They can allow unauthenticated remote code execution on servers that run PHP for web requests.

Which PHP versions fix PHP2Shell?

PHP 8.5.12, 8.4.27, 8.3.36 and 8.2.35 from php.net. Distribution and vendor packages may carry the fix under different, older-looking version numbers, so check the package changelog for the CVE.

Is my WordPress site affected?

If it runs on an unpatched PHP build, yes, regardless of how up to date WordPress and its plugins are. The flaw is in PHP itself, so the fix comes from your server, host or container image.

Is disabling session.upload_progress enough?

No. It blocks the confirmed session paths for one of the two bugs and covers the narrow third issue, CVE-2026-115560. It does nothing for CVE-2026-109618. Only an update is a complete fix.

I’m on PHP 7.4 or 8.1. What now?

php.net has no release for you, but PHP published source backports for 7.4, 8.0 and 8.1, and several vendors and distributions shipped backported packages. Use one of those immediately, then plan the upgrade to a supported branch.

Do I need to restart anything after updating PHP?

Yes. Restart every PHP-FPM pool, Apache if you use mod_php, LiteSpeed, and long-running PHP workers. Until they restart, they keep running the vulnerable code already loaded in memory.

Should I rotate passwords and keys?

If an internet-facing server ran an unpatched build after details went public, it is a sensible precaution. Researchers showed worker memory could be read remotely, and that memory can hold credentials from other requests.

Conclusion

The PHP2Shell vulnerability lives below your application, so the only real fix is a patched PHP build that is actually running. Everything else in this post is either a way to get there or a way to buy time. If you remember one thing, make it this: verify the fix by CVE in the package, and verify the process by its restart time. The version string will mislead you in both directions.

Need help patching PHP2Shell across your servers?

If you have more PHP servers than certainty, I can help you close this out properly:

• Inventory every PHP install across your VPS, cPanel, DirectAdmin and container hosts, with branch and package source.
• Patch each one through the right channel and prove the fix by CVE and process restart time.
• Apply and later roll back the interim mitigations safely, with a memory boundary in place.
• Rebuild and redeploy PHP container images, including pinned-digest pipelines.
• Review logs for the published indicators and plan secret rotation without breaking production.
• Plan the move off end-of-life PHP branches and off mod_php.

Send me the output of php -v, your package changelog check, and how PHP runs on the server (FPM, mod_php or LiteSpeed), and I’ll tell you where you stand.

The post PHP2Shell Vulnerability: What Happened, How to Patch, and How to Prove It Worked appeared first on John Nessime.

That is the thing about DirectAdmin PHP-FPM pools that catches people out. You think you are tuning a site. You are not. You are tuning a user, and every domain that user owns is sharing the same worker budget, the same queue, and the same memory ceiling.

This post covers where DirectAdmin actually keeps the pool config, how to size pm.max_children from numbers your server gives you rather than from a blog post’s magic value, which per-site PHP limits are worth setting and which are theatre, why OPcache does not behave the way you expect on a multi-tenant box, and how to make all of it survive the next CustomBuild run.

The design fact that explains most of your 502s

DirectAdmin generates one FPM pool per user account, per PHP version. The pool is named after the Linux user. It listens on a Unix socket named after the user. It runs as that user. Apache or Nginx hands PHP requests to that socket for every domain and subdomain in the account.

So if a reseller client has twelve domains under one username, those twelve sites share a single value of pm.max_children. There is no per-domain pool. This is a long-standing feature request rather than an oversight, and it has a real consequence: the noisiest site in an account sets the availability of every other site in that account.

Once you have internalised that, the fix for a lot of “mystery 502” tickets stops being a config tweak and starts being an account layout decision. If a site matters commercially, give it its own DirectAdmin user. That is the cleanest isolation the panel offers without going off-piste, and it costs you nothing but a bit of admin tidiness.

The alternative, if you have User jails enabled, is DirectAdmin’s isolated FPM mode. That runs a separate php-fpm master process per jailed user instead of a shared master with many pools:

da config-set isolated_fpm 1
systemctl restart directadmin
da taskq --run 'action=rewrite&value=httpd'

It only applies to users who already have Jailed enabled. The trade-off is memory: one master process per user, plus a separate OPcache region for each, adds up quickly. DirectAdmin mitigates that by letting idle per-user FPM instances exit after a period of inactivity, but on a box with sixty accounts you will feel it. I would reach for this on a server hosting a handful of paying clients, not on a general shared box.

Where the pool config actually lives

This trips up almost everyone the first time, because there are two files with nearly the same name and only one of them matters for user sites.

• /usr/local/php83/etc/php-fpm.conf is the master config for that PHP version. Editing it by hand is how you learn that CustomBuild overwrites it.
• /usr/local/directadmin/data/users/USERNAME/php/php-fpm83.conf is the generated per-user pool. This is the file that governs a customer’s sites.
• /usr/local/directadmin/data/templates/php-fpm.conf is the template those per-user files are rendered from.

Substitute your PHP version for 83 throughout. To see what every account is currently running:

ls /usr/local/directadmin/data/users/*/php/php-fpm*.conf

grep -H 'pm.max_children' /usr/local/directadmin/data/users/*/php/php-fpm*.conf

The second command is the one I run first on any server I have just inherited. It gives you the entire worker budget of the box on one screen, and it is usually the moment you discover that forty accounts are all sitting on the stock default.

The DirectAdmin template ships with pm = ondemand and a low default child count, driven by a MAX_CHILDREN token. Ondemand means no workers exist until a request arrives, and idle workers are reaped after a timeout. On a shared box with many mostly-idle accounts, that is the right default and I would leave it alone. On a server dedicated to one busy WordPress site, the spawn latency on the first request after an idle period is real and switching to dynamic is defensible. Most people who switch to dynamic on a shared server are trading memory they do not have for a latency win they will not notice.

Sizing pm.max_children without guessing

Every tuning guide gives you a formula. The formula is fine. The input everyone gets wrong is worker memory, because they use a number from someone else’s server instead of measuring their own. A lean WordPress install and the same install with a page builder, a security plugin and WooCommerce are not remotely the same workload.

Measure it. This averages the resident memory of the workers currently running in one pool:

ps -eo rss,args | grep '[p]hp-fpm: pool wpuser' 
  | awk '{sum+=$1; n++} END {if (n) printf "%d workers, avg %.0f MBn", n, sum/n/1024}'

The bracket trick in the grep pattern stops grep matching its own process. rss is resident set size in kilobytes, which is why the awk divides twice. Run it during a busy period, not at three in the morning, and run it a few times.

Two honest caveats about RSS. It overstates real consumption, because workers forked from the same master share a lot of pages, including the OPcache region. And it understates your worst case, because a worker that has not yet hit a memory-hungry request looks cheap. Treat the average as a planning figure, not a guarantee, and leave headroom.

Then the arithmetic:

1. Take total RAM and subtract what MySQL or MariaDB, the web server, mail, and the panel itself need. On a WordPress box the database is usually the second-largest consumer and it is not optional.
2. Reserve a further slice for page cache and burst. I aim to leave a comfortable margin free rather than allocating to the last megabyte.
3. Divide what is left by your measured per-worker figure. That is your ceiling for all pools combined.
4. Split that ceiling across accounts by actual traffic, not evenly.

Step three is where people go wrong on cheap VPS plans. If you are running a dozen WordPress sites on one of the low-RAM tiers from a provider like Contabo or InterServer, the honest answer is often that you cannot give every account a generous pool and you need to either cut the site count or move up a tier. Setting pm.max_children to a number your RAM cannot back does not buy capacity. It buys the OOM killer, and the OOM killer usually takes the database with it, which turns a slow site into a broken one.

To raise the server-wide default:

da config-set php_fpm_max_children_default 30
systemctl restart directadmin
da build rewrite_confs
systemctl restart php-fpm83

For a single account, go to Admin Level → Custom HTTPD Configurations → domain.com and open the php-fpm entry for that PHP version. In the |CUSTOM1| textarea, set the token:

|?MAX_CHILDREN=40|

That syntax is a template token override, not a config line. It tells the template renderer to use 40 instead of the default when it writes pm.max_children for that user. Writing pm.max_children = 40 in that box instead is the single most common mistake here, and it does something worse than nothing: the template still emits its own pm.max_children, you now have the directive twice in one pool, and FPM refuses to start. On a server where one broken pool file stops the whole master, that takes down every site on the box.

Rewrite and restart after any change, then confirm the value actually landed in the generated file rather than trusting the panel.

Per-site PHP limits, and the difference that matters

The |CUSTOM2| textarea on the same page is where PHP settings go. The syntax is FPM pool syntax, not php.ini syntax:

php_admin_value[memory_limit] = 512M
php_admin_value[max_execution_time] = 120
php_value[upload_max_filesize] = 64M
php_value[post_max_size] = 64M
php_value[max_input_vars] = 5000

The admin in php_admin_value is not decoration. Settings written with php_value can be raised at runtime by the application through ini_set(). Settings written with php_admin_value cannot. That distinction is the whole game on a multi-tenant server.

WordPress and a good number of plugins will happily try to raise memory_limit at runtime, and some optimisation plugins push it to values that would let one bad request consume a large slice of the machine. If you want a genuine ceiling, use php_admin_value. If you want a sensible starting point that a developer can raise for a legitimate import job, use php_value. I use admin for memory and execution time, plain for upload sizes, because upload sizes are a support-ticket generator and not a stability risk.

max_input_vars deserves its own note. It is the one that silently truncates a large WooCommerce product save or a menu with hundreds of items, with no error anywhere. The user reports “my changes did not save” and every log is clean. If you support content-heavy sites, raise it before someone asks.

Letting site owners set their own

Under FPM there is no .htaccess route for PHP settings, because FPM is a separate process and never sees the file. DirectAdmin enables the per-directory alternative by default: a .user.ini file in public_html, controlled by the user_ini.filename setting. It handles the PHP_INI_PERDIR and PHP_INI_USER class of settings only, so it will never override anything you set with php_admin_value. That is the point of it.

The WP-CLI gap

None of this applies to WP-CLI. Cron jobs and shell commands run through the CLI SAPI and read the CLI php.ini, not your pool. So a plugin update that works fine in the browser can die on memory in a cron-driven wp cron event run, and you will hunt through the pool config finding nothing wrong. Check the CLI limits separately when a scheduled task fails but the same action succeeds in wp-admin.

OPcache is shared, and that is the invisible one

OPcache allocates its shared memory region when the FPM master starts, before any pool exists. Every pool under that master inherits the same region. You cannot meaningfully give one account its own OPcache budget through a pool directive, because by the time the pool is read the memory has already been carved out.

Two consequences, and the second is the one nobody plans for.

First, capacity. The default OPcache size is comfortable for one application and thin for thirty WordPress installs, each with its own core, theme and plugin tree. When it fills, OPcache starts evicting and eventually restarts, and every site on the version gets slower at once with nothing in any error log to explain it. Watch the wasted-memory and restart counters rather than guessing.

Second, the sizing you actually need scales with the total number of PHP files across all accounts on that PHP version, not the biggest site. Consolidating everyone onto one PHP version looks tidy and quietly makes this worse. Spreading accounts across two or three PHP versions gives each master its own region, which is an underrated side effect of not forcing everyone to upgrade on the same day.

OPcache is configured through CustomBuild rather than the pool. Edit the customised copy under CustomBuild’s custom directory so your changes survive updates, then rebuild and restart the FPM master.

Making changes survive the next rebuild

Anything you type directly into a generated file is temporary. The next rewrite_confs, PHP update or panel update will flatten it, usually weeks later, and the regression will look like it came from nowhere.

There are three durable places to put changes, in increasing order of blast radius:

• Per user, all PHP versions. /usr/local/directadmin/data/users/USERNAME/php/php-fpm.conf.custom1 and .custom2. These feed the same CUSTOM tokens as the panel textareas, so the settings follow the account when the user switches PHP version in Domain Setup. This is the one I reach for first.
• Server-wide, all users, all versions. /usr/local/directadmin/data/templates/custom/php-fpm.conf.custom1 and .custom2. If either exists, its contents are injected into every pool file DirectAdmin writes. Good for a baseline you want everywhere.
• A full custom template. Copy /usr/local/directadmin/data/templates/php-fpm.conf to the custom subdirectory and edit it. This is the only route for pool directives that have no token, but you now own that file forever and stop receiving upstream template improvements. Use it when nothing else works, and leave a comment at the top saying why.

Global first, then per-user on top. Both land in the same token, so a per-user value does not replace a global one, it appends. For a directive that can only appear once in a pool, that is a duplicate and a failed restart.

Troubleshooting

“server reached max_children setting”

The pool name in that warning tells you which account, not which site. Find the log first rather than guessing at a path:

grep -i 'error_log' /usr/local/php83/etc/php-fpm.conf

Before raising the limit, check whether the requests are legitimate. Cross-reference the timestamps against each domain’s access log in that account. Nine times out of ten it is one of three things: an uncached admin-ajax.php loop from a plugin, a bot crawling faceted search or filtered archive URLs that bypass page cache, or wp-cron.php firing on every request on a site with a heavy scheduled task. Raising pm.max_children to absorb bot traffic is paying for garbage with RAM.

502 or 504 with no PHP error

The request is dying at the FPM boundary rather than inside PHP. Usual causes are a worker killed by request_terminate_timeout, a full listen queue, or the master failing to start after a config change. Check the FPM service status before you check anything in WordPress. If FPM did not start at all, the panel will still show your settings saved and every site on that PHP version will be down.

Changes in the panel that do nothing

Read the generated per-user file after every change. If the value is not in there, the rewrite did not run or the token was wrong. If it is in there and PHP still reports something else, the master was not restarted, or something later in the pool is overriding it. A temporary phpinfo() file served by the site in question settles the argument in seconds. Delete it immediately afterwards.

Session or temp files that are not where you left them

If PHP writes to /tmp and you cannot see the files over SSH, that is systemd’s PrivateTmp giving the FPM service its own private namespace. Nothing is broken. The files exist, in a mount only that process can see.

disable_functions that will not budge

disable_functions is special. From a pool you can add to the list but not remove from it, because the php.ini value has already been applied. To allow a function for one account you have to stop setting it in php.ini at all and drive the whole thing from templates instead. DirectAdmin documents that pattern, and it is worth reading before you start rather than after you have half-done it, because the intermediate state removes protection server-wide.

Common mistakes

• Editing /usr/local/phpXX/etc/php-fpm.conf directly and being surprised when it reverts.
• Writing pm.max_children = 40 into a CUSTOM box instead of the |?MAX_CHILDREN=40| token, producing a duplicate directive and a dead master.
• Sizing workers from a memory figure found online rather than measured on the box.
• Using php_value for memory_limit on shared hosting, then wondering how a plugin raised it to 2G.
• Assuming pool settings apply to WP-CLI and cron.
• Raising limits to absorb bot traffic instead of blocking or caching it upstream.
• Putting a client’s revenue site in the same account as their abandoned projects.

Best practices for tuning DirectAdmin PHP-FPM pools

• One DirectAdmin user per site that matters. Isolation you get for free beats isolation you have to engineer.
• Keep ondemand on shared servers. Only move to dynamic when a single busy site owns the box.
• Set a global baseline in the custom template, then override per user. Do not hand-tune forty files.
• Use php_admin_value for anything that protects the server and php_value for anything that is only a convenience.
• Cut PHP requests before you add workers. Full-page caching, a CDN in front, and Cloudflare or similar handling bots removes far more load than any pool setting.
• Disable WordPress’s request-triggered cron and drive it from a real system cron, so scheduled work stops competing with visitors for workers.
• Alert on saturation, not just uptime. Worker utilisation per pool and PHP-FPM error log entries are the signals worth having in Netdata, Prometheus, or whatever you already run. A site that is queueing looks perfectly healthy to an HTTP check.
• Re-measure after major plugin changes. A page builder or a new security plugin moves per-worker memory enough to invalidate your arithmetic.

Frequently asked questions

Can I create a separate PHP-FPM pool for each domain in DirectAdmin?

Not through the panel. Pools are generated per user, per PHP version, and every domain in the account shares one. The supported ways to get separation are to move the domain to its own DirectAdmin user, or to enable isolated FPM mode for jailed users, which gives each user their own master process. Anything else means custom systemd units you maintain yourself, outside the panel’s knowledge.

What is a good pm.max_children value for WordPress?

There is no portable number, because the input is your measured per-worker memory and your available RAM after the database. Measure the average resident size of your workers under real traffic, subtract everything else the server needs from total RAM, and divide. A lean brochure site and a WooCommerce store with thirty plugins can differ by a factor of three or more.

Where does DirectAdmin store PHP-FPM pool configuration?

Generated per-user pools live at /usr/local/directadmin/data/users/USERNAME/php/php-fpmXX.conf, rendered from the template at /usr/local/directadmin/data/templates/php-fpm.conf. Do not edit either directly. Put durable changes in the custom files under the user’s php directory or in the templates/custom directory.

Why do my PHP settings disappear after a CustomBuild update?

Because they were written into a generated file. CustomBuild and DirectAdmin regenerate those files on update and on any config rewrite. Only the custom template files and the CUSTOM token areas persist.

Does .htaccess work for PHP settings under PHP-FPM?

No. FPM is a separate process from the web server and never reads .htaccess. Use a .user.ini file in the web root for the settings PHP allows at that level, or set the rest in the pool.

Should I switch from ondemand to dynamic or static?

On a shared server, no. Ondemand exists precisely so that dozens of idle pools cost you nothing. On a server dedicated to one high-traffic site, dynamic removes cold-start latency and static gives the most predictable memory profile. The question to ask is whether your idle pools outnumber your busy ones.

Can I give one WordPress site its own OPcache?

Not from the pool config. OPcache’s shared memory is allocated by the FPM master at startup and shared by every pool under it. The practical routes are isolated FPM mode, which gives jailed users their own master, or moving the site to a different PHP version so it sits under a different master.

The one thing to take away

DirectAdmin PHP-FPM pools are a per-user boundary, not a per-site one. Every tuning decision that follows, how many workers to allow, whether a memory limit should be a suggestion or a wall, whether a client’s twelve domains belong in one account, comes out of that single fact.

Measure your workers before you size them, use the CUSTOM token files so your work survives the next rebuild, and watch pool saturation rather than waiting for the 502 ticket. The site that goes down is rarely the site that caused it.

Need a hand with a DirectAdmin server?

Most of the work I do on DirectAdmin boxes is this kind of thing: sites that are fine in isolation and fall over together. If that sounds familiar, I can help with:

• Auditing every pool on a server and producing a worker budget that matches the RAM you actually have
• Tracking down which domain in a shared account is saturating the pool, and why
• Building a global custom template so per-user tuning stops being forty hand-edited files
• Splitting a multi-site DirectAdmin account into isolated users without breaking mail, DNS or SSL
• OPcache and per-version sizing on servers hosting many WordPress installs
• Wiring up pool-level monitoring and alerts so saturation shows up before the ticket does

Send me a pool file, the output of that RSS command, or the last hour of your PHP-FPM error log, and I will tell you what I see.

The post DirectAdmin PHP-FPM Pools: Why One WordPress Site Takes Down the Others appeared first on John Nessime.

That framing is where most of these arguments go sideways. On one box serving a normal website, all three of these servers will handle your traffic without breaking a sweat. The web server is almost never the slow part. The difference shows up months later, at 2am, in who gets paged and why.

So this post compares Nginx vs Apache vs Caddy on the three things that genuinely change your on-call life: how each one behaves when it runs out of capacity, who owns the certificate lifecycle, and where configuration lives when someone other than you needs to change it. Then a decision procedure, the mistakes I keep running into, and an FAQ.

Why the benchmark comparison picks the wrong winner

Almost every throughput comparison you’ll find measures static file serving on an idle machine with no application behind it. That is a real measurement of a thing that is not your bottleneck. If you’re proxying to PHP-FPM, Gunicorn, or a Node process, the request spends milliseconds in the web server and everything else in your code and your database.

The honest exception: if you are running a CDN origin, terminating TLS at a high connection rate, or serving genuinely large volumes of static assets, the connection handling model does show up in your bill. That is a real workload and Nginx has earned its reputation there. It just isn’t most projects.

For everyone else, the useful question is not “which is fastest” but “which chores am I choosing to keep.” That’s what the rest of this is about.

Failure family one: the process model decides how you fall over

This is the invisible one. Nobody notices it during a migration and everybody notices it during a traffic spike.

Apache: a hard worker ceiling, and a queue behind it

Apache’s behaviour depends entirely on which Multi-Processing Module is loaded. With prefork, you get one process per connection, capped by MaxRequestWorkers. When you hit that cap, new connections don’t get rejected. They sit in the kernel’s listen backlog waiting for a worker to free up.

The symptom is the worst kind: the site “hangs.” Load average is unremarkable. The application log is quiet because the requests never reached the application. Your uptime check times out but a manual curl from the box works fine. People spend hours looking at the database.

Check which MPM you’re actually running before you theorise about anything:

# RHEL, AlmaLinux, Rocky
httpd -V | grep -i "Server MPM"

# Debian and Ubuntu
apache2ctl -V | grep -i "Server MPM"

The reason prefork survives is mod_php. It isn’t safe with Apache’s threaded MPMs, so PHP stacks historically pinned themselves to prefork and inherited its concurrency profile. The Apache project itself now points people at PHP-FPM over mod_proxy_fcgi instead, which frees you to run mpm_event and gets you HTTP/2 as a side effect, since mod_http2 disables itself under prefork.

If you inherit an Apache box, that migration is usually the single highest-value change available to you, and it does not require leaving Apache.

Nginx: cheap connections, different limits

Nginx runs a small number of worker processes, each with an event loop. An idle keepalive connection costs a file descriptor and a little memory, not a process. Ten thousand of them is not a crisis.

Its ceiling is worker_processes multiplied by worker_connections, plus whatever your file descriptor limit allows. When you hit it, Nginx says so plainly in the error log rather than silently queueing. That’s a genuine operational advantage: the failure announces itself.

The trade is that when Nginx is proxying, saturation moves downstream. You stop seeing worker exhaustion and start seeing 502s and 504s from an overloaded PHP-FPM pool or app server. The web server is fine; you now have to go find the real limit.

Caddy: goroutines, and a softer edge

Caddy is a Go binary and handles connections with goroutines that the runtime multiplexes onto OS threads. Practically, that sits between the other two: connections are cheap like Nginx, but you don’t tune a worker count at all.

The failure mode is correspondingly softer and, honestly, harder to reason about. Instead of a clean “workers exhausted” line, you get memory growth and garbage collection pressure. There’s no knob you turned wrong, which is pleasant right up until you need to explain what happened.

Failure family two: who owns the certificate lifecycle

This is the one that actually causes outages, and it is the sharpest genuine difference between the three.

With Nginx or Apache, certificate management is a separate moving part. Certbot or another ACME client writes new files to disk on a timer, and the running server keeps serving whatever it loaded at startup. If nothing tells it to reload, the certificate on disk is valid and the certificate on the wire is expired. Users see a browser interstitial while your monitoring, if it checks the filesystem, reports everything fine.

The fix is to attach the reload to the renewal itself, not to a separate cron entry that might drift:

# Run the renewal end to end without touching real certificates.
# This exercises the challenge and the hook, which is the point.
certbot renew --dry-run

# Attach the reload to renewal so it only fires when a cert actually changed
certbot renew --deploy-hook "systemctl reload nginx"

The distinction that matters: --deploy-hook runs only when a certificate was actually renewed, so you’re not reloading the server twice a day for nothing. A blanket post-hook reloads regardless.

Caddy removes this category of failure. Certificate issuance and renewal are built into the server itself, it swaps the certificate in memory when it renews, and there is no external hook to forget. Point several instances at the same storage backend and they coordinate rather than each hammering the CA. If you have ever been paged for an expired certificate, this alone is a serious argument.

It is not free of foot-guns, though. On-demand TLS, where Caddy obtains a certificate during the handshake for a hostname it has never seen, is genuinely useful for multi-tenant setups where customers point their own domains at you. Enabled without restriction, it is an open door: anyone who points a DNS record at your IP can make you request a certificate. Caddy’s own documentation is blunt that it must be both enabled and restricted, and the mechanism is an ask endpoint you host:

{
    on_demand_tls {
        ask http://localhost:9123/ask
    }
}

https:// {
    tls {
        on_demand
    }
    reverse_proxy 127.0.0.1:3000
}

Caddy asks that endpoint whether a hostname is allowed before it will issue. It should be a fast indexed lookup against your own tenant table, returning in milliseconds, because a TLS handshake is being held open while it answers. The older interval and burst rate-limiting options are no longer recommended and should be removed if you still have them in a config.

One more Caddy default worth knowing: the admin API listens on localhost port 2019 and accepts a full config replacement without authentication. That is fine bound to loopback and catastrophic if you helpfully expose it while debugging a container.

Failure family three: where the configuration lives

This is the axis people underweight, and it’s usually the one that actually decides the answer.

Apache supports .htaccess: per-directory configuration, read at request time, changeable by anything that can write to the directory. No reload, no root access. That is why the entire shared hosting world is built on Apache, and why control panels like cPanel and DirectAdmin, and hosts like InterServer, assume it. A WordPress plugin can rewrite its own rules and it just works.

The costs are real and they’re the mirror image of the benefit. With overrides enabled, Apache walks the directory tree looking for .htaccess files on every single request. And your security rules can be silently overridden by whatever gets deployed into a directory, by anyone who can deploy.

Nginx has no equivalent and this is deliberate. Everything is central, and a change requires a reload. Rewrites are handled with try_files rather than per-directory rule files. If you own the box, that’s a feature: nothing changes routing behind your back and the running configuration is exactly what’s in version control. If you host other people’s applications, it’s a support burden, because every customer rewrite rule becomes a ticket for you.

Caddy is central too, either a Caddyfile or JSON. The difference is that config changes can go through the admin API as an atomic swap rather than a file edit plus a signal, which suits automated pipelines nicely.

Nginx: where it wins and where it doesn’t

Where it wins: high connection counts on modest hardware, static and cached content, TLS termination in front of an application fleet, and the sheer weight of the ecosystem. Every stack you’ll meet has a known-good Nginx config, and everyone you hire has already read one.

Where it doesn’t: the DNS behaviour catches people constantly. A hostname written directly into proxy_pass, or into an upstream block, is resolved once at startup and cached for the lifetime of the process. When your upstream is a cloud load balancer or a container that moves, Nginx keeps sending traffic to an IP that stopped being yours. Nothing in the log says “stale DNS”; you just get connection timeouts to an address that looks plausible.

Forcing re-resolution means putting the name in a variable and giving Nginx a resolver, because that’s what moves the lookup from config parse time to request time:

location / {
    # resolver moves lookups to runtime; valid= caps how long a result is reused
    resolver 127.0.0.53 valid=30s ipv6=off;

    # the variable is the trick: it defers evaluation to per-request
    set $upstream_host app.internal.example.com;
    proxy_pass http://$upstream_host:8080$request_uri;
}

Note the $request_uri on the end. Once a variable appears in proxy_pass, Nginx stops doing its usual URI rewriting for you, so you have to pass the path explicitly. Miss that and every request lands on the upstream’s root. Also worth knowing: an upstream block defined elsewhere with the same name will take precedence over the runtime lookup, which produces a very confusing afternoon.

The other honest downside is governance. Nginx is owned by F5, and a longtime core developer forked it to freenginx after a dispute over how security issues were being handled, with an earlier fork, Angie, already in existence. Mainline Nginx remains overwhelmingly dominant and I would not choose a fork for a client project today. But “who decides what ships” is a fair question to ask about any dependency, and this one now has a public answer.

Apache: where it wins and where it doesn’t

Where it wins: anywhere applications need to configure the web server without touching the web server. Shared hosting, multi-tenant WordPress, legacy applications that ship their own rewrite rules. The module ecosystem is enormous and modules load at runtime rather than requiring a rebuild. And the documentation is, quietly, the best of the three: nearly every directive has a page explaining its interactions.

Where it doesn’t: memory per connection, if you’re still on prefork. Slow clients holding processes open is the specific scenario that hurts, because a process that’s waiting on a phone on bad mobile data is a process nobody else can use. Putting a CDN or a proxy in front absorbs a lot of that, which is a large part of why Apache origins behind Cloudflare behave so much better than bare ones.

I would not migrate a working Apache installation to Nginx purely for performance. I would move it from prefork and mod_php to mpm_event and PHP-FPM first, then measure, and quite often stop there.

Caddy: where it wins and where it doesn’t

Where it wins: anything where certificate management is the operational risk. Small teams without a dedicated ops person, internal tooling with a long tail of hostnames nobody tracks, multi-tenant products serving customer-owned domains, container stacks where a single static binary with no runtime dependencies is a real simplification. A working HTTPS reverse proxy is genuinely a few lines.

app.example.com {
    encode zstd gzip
    reverse_proxy app:3000
}

That obtains a certificate, redirects HTTP to HTTPS, negotiates compression and proxies, with no ACME client, no cron, no reload hook.

Where it doesn’t: the ecosystem gap is real. When something unusual breaks, there are fewer Stack Overflow answers and fewer engineers who have seen it before. Adding a plugin means rebuilding the binary with xcaddy rather than dropping in a module, which is fine in CI and annoying on a box you SSH into. And there’s a subtler cost: automation you don’t understand is still automation you’re responsible for. Being paged about ACME behaviour you’ve never had to learn is a worse afternoon than being paged about Certbot.

On upstream DNS, Caddy dials static upstreams by name so resolution happens at dial time rather than being frozen at config load. When the set of addresses changes, the dynamic a upstream module with a refresh interval is the built-in answer, which is a cleaner story than Nginx’s variable trick.

A decision procedure for Nginx vs Apache vs Caddy

Work down this list and stop at the first one that matches. It’ll be right more often than a benchmark.

1. Do applications you don’t control need to change server behaviour? If yes, Apache. Nothing else has .htaccess, and reimplementing it in tickets is not a plan.
2. Is TLS renewal your top operational risk? Small team, no dedicated ops, lots of hostnames, or customer-owned domains: Caddy. It deletes a whole class of incident.
3. Are you terminating a very high connection rate, or serving heavy static content? Nginx. This is the workload it was designed around.
4. Does the team already run one of these well? Keep it. Operational familiarity beats a 20% throughput difference you were never going to measure.
5. Is there a working Apache install and no specific complaint? Fix the MPM and PHP handler, then reassess. Most “we need Nginx” tickets are actually “we need to stop using prefork.”
6. None of the above? Nginx for anything that will be handed to another engineer. Caddy for anything you’ll run yourself.

Common mistakes

• Renewing certificates without reloading. The single most common self-inflicted TLS outage on Nginx and Apache. Use a deploy hook and verify it with a dry run.
• Migrating for benchmark numbers. You inherit a new failure mode and a team that has never debugged it, in exchange for latency nobody could perceive.
• Leaving Apache on prefork after moving to PHP-FPM. The migration is only half done, and you’re still paying prefork’s memory cost while also giving up HTTP/2.
• Hostnames baked into proxy_pass with dynamic upstreams. Works perfectly until the upstream IP changes, then fails in a way that looks like a network problem.
• Enabling Caddy’s on-demand TLS without an ask endpoint. You’ve handed strangers the ability to make you request certificates.
• Exposing Caddy’s admin API beyond loopback. Unauthenticated full config replacement is exactly as bad as it sounds.
• Monitoring the certificate file instead of the handshake. The file is almost never the thing that’s wrong. Check what the server actually presents, from outside the box.

How I’d decide, in practice

• Pick based on who has to change the config six months from now, not on requests per second today.
• Whichever you choose, dump the effective configuration rather than reading files: nginx -T, apachectl -S, caddy adapt --config /etc/caddy/Caddyfile. Include files hide surprises.
• Monitor TLS expiry as an external handshake check from a service like Better Stack or a Grafana Cloud synthetic, not as a filesystem check on the box.
• Put something in front. A CDN like Cloudflare or Fastly absorbs slow clients and connection floods, which flattens most of the architectural differences here.
• Run one server type per environment. Mixing Nginx in staging and Apache in production means your rewrite rules are untested by definition.
• Validate before reloading, every time. nginx -t, apachectl configtest and caddy validate all exist so you don’t find out from users.

Frequently asked questions

Is Caddy production ready?

Yes. It’s been running real workloads for years and its certificate automation removes more operational risk than its smaller ecosystem adds, for most teams. The caveat is support surface, not stability: when you hit something unusual, there are fewer people who have hit it before you.

Can I run Nginx and Apache together?

Yes, and it’s a common pattern: Nginx on 80 and 443 handling TLS and static files, proxying dynamic requests to Apache on a local port so applications keep their .htaccess behaviour. You get Nginx’s connection handling and Apache’s per-directory config. The cost is two servers to patch, two logs to correlate, and real client IP to forward correctly.

Which is best for WordPress?

Apache if plugins need to write rewrite rules, which on a typical multi-plugin site they do. Nginx if you control the site and are willing to translate those rules into try_files and static location blocks once. Plenty of high-traffic WordPress runs on Nginx; it just means plugin-generated rules are your job now.

Does Nginx really re-resolve DNS for upstreams?

Not by default. A literal hostname in proxy_pass or an upstream block is resolved at startup and reused indefinitely, regardless of TTL. You get runtime resolution by using a variable together with a resolver directive, and remembering that this changes how the request URI is passed.

Should I switch from mod_php to PHP-FPM?

In almost all cases yes. It’s the change that unlocks Apache’s threaded MPMs and HTTP/2, and it separates PHP’s lifecycle from the web server’s so you can restart one without the other. Check first for anything relying on PHP settings in Apache config or .htaccess, since those move to a .user.ini file with different syntax.

Does the freenginx fork mean I should stop using Nginx?

No. Mainline Nginx under F5 remains the overwhelmingly dominant option with the broadest packaging and support. The fork is worth knowing about as context on project governance rather than as a migration target, and I wouldn’t put a client on a fork without a specific reason.

Which uses the least memory?

Nginx, generally, with Caddy close behind and Apache furthest away when running prefork. But the gap narrows sharply once Apache is on mpm_event, and on a VPS from a provider like Hetzner or DigitalOcean the memory your application uses will dwarf all three. Measure your own stack before treating this as a deciding factor.

The one thing worth remembering

The Nginx vs Apache vs Caddy question is not a performance question. All three are fast enough for what you’re doing. What differs is which operational chores each one hands back to you: Apache gives applications control at the cost of memory and predictability, Nginx gives you central control at the cost of owning every rewrite rule and the certificate reload, and Caddy takes the certificate lifecycle off your plate at the cost of a smaller ecosystem when things get strange.

Pick the set of chores your team can actually carry. Then go fix the thing that’s genuinely slow, which is almost certainly not the web server.

Need a second opinion on your web server setup?

Most of the work I do here is unglamorous and pays for itself quickly. Things I can help with:

• Auditing an existing Nginx, Apache or Caddy config and telling you what will break under load before it does
• Migrating Apache from prefork and mod_php to mpm_event with PHP-FPM, without breaking existing .htaccess behaviour
• Translating a working Apache rewrite set into an Nginx configuration, with a test plan so you know it matches
• Fixing certificate renewal that runs but never reloads, including deploy hooks and external expiry monitoring
• Setting up Caddy for multi-tenant or customer-domain hosting with on-demand TLS properly restricted
• Diagnosing intermittent 502s, 504s and stale-upstream timeouts that look like network faults and aren’t

Send me your config, an error log excerpt, or the output of nginx -T and tell me what you’re seeing. I’d rather look at the real thing than guess from a description.

The post Nginx vs Apache vs Caddy: What Actually Decides It in Real Projects appeared first on John Nessime.

The thing that needed the memory was Redis, installed three weeks earlier to speed up the admin, running with the configuration it shipped with. Redis defaults to no memory limit and a policy of never evicting anything. Left alone it will happily grow until the machine runs out, and then the kernel picks a victim, and it will not necessarily pick Redis.

That is the framing for everything below. Redis object caching for WordPress is genuinely one of the highest-value changes you can make to a busy site, and Redis out of the box is configured as a durable datastore, not a cache. You are storing data you can regenerate at any time. The defaults assume the opposite.

Setup takes ten minutes. The gotchas are the post.

What it does, and what it doesn’t

WordPress has an object cache built in, and by default it lasts exactly one request. Every page load fetches the same options, terms, post meta and user meta from MySQL, uses them, and throws them away. A persistent object cache keeps that data between requests, so the second visitor does not repeat the first visitor’s queries.

Two expectations worth setting before you install anything.

It is not a page cache. Page caching serves a finished HTML file and never runs PHP. Object caching runs the whole application and makes the database part faster. They live in different drop-ins, do different jobs, and coexist happily.

Its biggest effect is where page caching does not reach. Logged-in requests, wp-admin, WooCommerce carts and checkouts, REST API calls. If your front end is already cached and fast while the dashboard crawls, an object cache is aimed exactly at your problem.

Setup

1. Install Redis from your distribution’s packages, and bind it to localhost unless something remote genuinely needs it.
2. Install a PHP Redis client. PhpRedis (the PECL extension) is faster than the pure-PHP Predis and is what you want on a real server. Relay is a newer option worth knowing about if you are pushing volume.
3. Install the Redis Object Cache plugin, then add the constants below to wp-config.php before enabling the drop-in.
4. Enable it, which copies object-cache.php into wp-content/. That file, not the plugin, is what WordPress actually loads.
5. Verify it end to end, which is step five for a reason.

// wp-config.php, above the "That's all, stop editing" line.

define( 'WP_REDIS_HOST',     '127.0.0.1' );
define( 'WP_REDIS_PORT',     6379 );

// Two different protections, and you want both. The database
// number scopes flushes; the prefix prevents key collisions.
define( 'WP_REDIS_DATABASE', 1 );
define( 'WP_REDIS_PREFIX',   'acme-prod:' );

// Ceiling for keys written with no expiry, so nothing lives forever.
define( 'WP_REDIS_MAXTTL',   86400 );

One note if you are following an older tutorial: the prefix constant used to be WP_CACHE_KEY_SALT and was renamed to WP_REDIS_PREFIX in version 2.0 of the plugin, to stop it being confused with a core constant of the same name. The old name is still read for compatibility, but if a guide is still using it, that guide predates a major version and its other advice may too.

Then prove it works rather than trusting a green indicator on a settings page:

# The plugin's own view.
wp redis status

# Write through WordPress, read it back through WordPress.
wp eval 'wp_cache_set("probe","ok","test",60); echo wp_cache_get("probe","test");'

# Then confirm the key landed in the database and prefix you expect.
redis-cli -n 1 --scan --pattern 'acme-prod:*' | head

Site Health under Tools will also tell you whether WordPress considers a persistent object cache to be in use. That is the check to trust, because it reflects what core sees rather than what the plugin believes.

Gotcha 1: the defaults are a datastore’s defaults

The one from the opening paragraph, and the only one on this list that can take a server down.

# /etc/redis/redis.conf

# Without a limit, Redis grows until the machine runs out and the
# kernel kills something. It will not necessarily kill Redis.
maxmemory 512mb

# The default policy is to refuse writes rather than evict. Correct
# for a datastore, wrong for a cache: you want the least recently
# used keys dropped, silently, forever.
maxmemory-policy allkeys-lru

# Cache contents are regenerable by definition. Persisting them buys
# nothing and costs you fork latency on save and slower restarts.
save ""
appendonly no

Size maxmemory against what the machine can spare after MySQL and PHP-FPM have what they need, not against what is currently free. Free memory on a healthy Linux box is mostly page cache, and it is doing useful work.

The honest trade-off with allkeys-lru: under memory pressure Redis will evict things you would rather it kept, and cache misses go up. That is the correct failure mode. The alternative is write errors surfacing inside WordPress, or an outage.

If you are on managed hosting, do not change any of this. Ask them what they have set, because they may have tuned it and may not appreciate you undoing it.

Gotcha 2: one Redis, several sites

Redis is a single key-value store. Two WordPress installs pointed at it with default settings both write post_123 to the same key and read each other’s data. On a server hosting several sites that is a correctness bug. Where it gets genuinely nasty is staging.

Staging is usually a clone of production, which means it inherits production’s wp-config.php, which means it inherits production’s Redis settings. Now both environments share a namespace, and a developer clearing the cache on staging clears production’s, or worse, staging serves production’s cached objects.

The two constants guard against different things and you want both:

• WP_REDIS_DATABASE selects a logical database, of which Redis provides sixteen by default. This scopes flushes, so one site clearing its cache does not clear another’s.
• WP_REDIS_PREFIX namespaces every key. This prevents collisions if two installs ever land in the same database, which is what happens the day somebody copies a config file.

Make the prefix readable and environment-specific: acme-prod: and acme-staging:, not a random string. It is a namespace, not a secret, and you will want to read it in redis-cli at some point.

If you use Relay as the client, a dedicated database and a unique prefix per install is a requirement rather than a suggestion.

Gotcha 3: some things are never cached, and one thing is enormous

Not every cache group is persistent. WordPress marks some as non-persistent, and plugins can mark their own, so those groups keep behaving exactly as they did before you installed anything. If you expected a specific thing to get faster and it did not, this is a likely reason and it is not a misconfiguration.

The more interesting one is alloptions. WordPress stores all autoloaded options as a single cache entry. On a site with a bloated options table, that is one very large key, fetched on every request, and invalidated whenever any autoloaded option is written. Under concurrency that produces a lot of simultaneous re-priming of the same large value.

Which means an object cache does not excuse a bloated options table; it changes where the cost lands. Check what your keys actually look like:

# Reports the largest key per type. If one key dwarfs everything
# else, it is probably alloptions and your options table needs work.
redis-cli -n 1 --bigkeys

Gotcha 4: flushing is not free

Clearing the object cache on a busy site means every subsequent request rebuilds what it needs from MySQL simultaneously. On a quiet site nobody notices. On a busy one you get a load spike at exactly the moment you were trying to fix something.

Know what your flush actually does. Some implementations issue a Redis-wide flush; others delete only keys matching your prefix. Those are very different operations when the instance is shared, and finding out during an incident is a bad time.

Also worth deciding deliberately: whether deploys flush the cache. Stale cached objects after a plugin update cause genuinely confusing bugs, so a flush in the deploy script is often right. Just do it knowing it costs a load spike, and put it at the start of a quiet window rather than at five o’clock on a Friday.

Troubleshooting

“Drop-in: invalid” or “not connected”. Usually the PHP extension is missing, or PHP cannot reach Redis on the host and port you gave it. Check with php -m | grep redis and redis-cli ping from the same machine PHP runs on, which is not always the machine you are logged into.

Everything looks connected but nothing is cached. Something replaced object-cache.php. Optimisation plugins install their own drop-in, and only one can win. Check the file’s contents, not just that it exists.

The site got slower. Latency to Redis. A remote instance across a network adds a round trip to every cache operation, and there are a lot of them per request. Localhost or a Unix socket beats a fast network every time.

Stale data after an update. Flush once, then work out which plugin is caching something it should be invalidating. Do not put a flush on every request to make the symptom go away.

Memory keeps climbing. Either no maxmemory, or keys written with no expiry and no WP_REDIS_MAXTTL ceiling. Check INFO memory and the eviction counters.

Staging and production interfering. They are sharing a database number, a prefix, or both. Fix the config on staging as part of your restore script so it cannot recur.

Common mistakes

• Running Redis with default memory settings on a shared box.
• Leaving persistence enabled for a pure cache workload.
• No prefix and no database number, so sites read each other’s objects.
• Cloning production to staging without changing the Redis settings.
• Trusting the plugin’s status page instead of Site Health and an actual read-back.
• Expecting it to speed up an already page-cached front end.
• Installing it and ignoring an options table full of autoloaded junk.
• Predis on a production site when PhpRedis is available.
• Putting Redis on a different host and adding a network hop to every cache call.
• Flushing the cache during peak traffic to fix a display bug.
• Two plugins competing for the object-cache.php drop-in.

Best practices

• Set maxmemory and allkeys-lru before you point any site at it.
• Disable persistence unless Redis is also doing a job that needs it.
• Unique database number and readable prefix per install and per environment.
• Bind to localhost, or require a password and TLS if it must be remote.
• PhpRedis over Predis, and Redis on the same host as PHP where you can.
• A WP_REDIS_MAXTTL ceiling so nothing lives forever by accident.
• Verify with Site Health plus a write-and-read test, not a status indicator.
• Clean up autoloaded options rather than caching the mess.
• Monitor memory used, evicted keys and hit rate; a collapsing hit rate is an early warning.
• Make staging’s Redis config part of the restore script, not something to remember.

FAQ

Do I need Redis if I already have a caching plugin?

Probably, because they solve different problems. Page caching handles anonymous visitors; object caching handles everything that cannot be page cached, which is the admin, logged-in users and anything transactional. Run both.

Redis or Memcached?

For WordPress, Redis, mostly because the tooling and plugin ecosystem around it is better and you get richer diagnostics. Memcached is perfectly capable and slightly simpler. This is not a decision worth agonising over.

How much memory should I give it?

Start modestly, watch memory used and evicted keys for a week, and raise it if evictions are constant while free memory remains. Sizing from an article is guessing; sizing from your own eviction counter is not.

Is it safe to lose everything in Redis?

Yes, for an object cache. Everything in it is regenerable from MySQL, which is exactly why persistence is unnecessary. Losing it costs a burst of database load, not data.

Why did my dashboard not get faster?

Check the cache is genuinely active first, then look at what else is slow: outbound HTTP calls during admin requests, a large autoloaded options blob, or the heartbeat. An object cache removes repeated database work and nothing else.

Should staging share the production Redis?

It can, with a different database number and a different prefix. It is cleaner not to. Either way, set it as part of the restore process so a clone never inherits production’s cache namespace.

The one thing to remember

Redis ships configured to protect data it assumes you cannot afford to lose. You are storing data you could regenerate in a second. Every default that follows from that assumption, unlimited memory, no eviction, persistence to disk, is wrong for your use case and one of them can take the server down.

So set maxmemory and an eviction policy before you enable the drop-in, give every install its own database and prefix, and verify with Site Health rather than a green dot. Then it is genuinely one of the best changes you can make to a WordPress site.

Want it set up properly?

Object caching is quick to install and easy to get subtly wrong in ways that show up weeks later. Work I take on:

• Installing and tuning Redis object caching on a VPS or dedicated server, including memory limits, eviction and persistence settings.
• Auditing an existing setup for shared namespaces, competing drop-ins and caches that are not actually active.
• Multi-site and multi-environment configuration so staging can never touch production’s cache.
• Cleaning up autoloaded options so the object cache is caching something sensible.
• Monitoring for Redis memory, evictions and hit rate, wired into Prometheus and Grafana.
• Diagnosing sites where caching was installed and nothing got faster.

Send me your Site Health info and redis-cli INFO memory, and I will tell you what is worth changing.

The post The OOM Killer Took MySQL: Redis Object Caching for WordPress appeared first on John Nessime.

Here is the thing that explains almost every case of this, and it is worth getting straight before you touch a single setting: wp-admin is the only part of your site that never gets cached. Every page cache plugin, every CDN, every reverse proxy in front of WordPress explicitly excludes logged-in requests. It has to, otherwise you would serve one editor’s draft screen to another. So the front end you keep measuring is a static HTML file being handed over by Cloudflare or Nginx, and the dashboard is your actual application running end to end, every single time.

A slow WordPress admin is not a separate problem from a slow site. It is the same problem, visible. The cache was hiding it, not fixing it.

This post walks through where that time actually goes, in the order I check things: how to tell server time from browser time, the wp_options table, outbound HTTP requests that block your page load, admin-ajax and the heartbeat, wp-cron, database bloat, and the server underneath it. Plus the troubleshooting steps for the cases that do not fit the pattern.

First, split the problem in two

Do not start changing things. Find out whether you are waiting on the server or on the browser, because the fixes have nothing in common.

Open the browser dev tools, go to the Network tab, hard reload an admin page, and look at the document request. If TTFB on that first request is three seconds, the server is thinking and nothing you do to JavaScript will help. If TTFB is 200ms and the page still feels slow, you have a rendering problem: too many scripts, a bloated admin notice area, a media grid loading hundreds of full-size images.

For server-side time, install Query Monitor. It is the single most useful diagnostic tool in the WordPress ecosystem and it costs nothing. It gives you, per admin page load: total queries and their time, which queries came from which plugin, every HTTP request WordPress made server-side and how long each took, hook timings, and PHP errors. Nine times out of ten the answer is sitting in the HTTP API panel or the Queries panel, and you will have it in under a minute.

One caution: Query Monitor itself adds overhead, so use it to find the culprit, then deactivate it before you measure the improvement.

The invisible one: your autoloaded options

This is the failure that hides for years and then bites everybody at once, and it is where I look first on any slow WordPress admin.

WordPress loads every option marked as autoload in one query at the start of every single request, then unserializes the lot into memory. That design is fine when the total is a few dozen kilobytes. It stops being fine when a page builder decides to autoload its full asset manifest, a slider plugin stores every slide’s settings in one row, an analytics plugin caches an API response there, and three plugins you uninstalled two years ago left their rows behind.

Now every admin click pulls several megabytes out of MySQL and runs it through PHP’s unserializer before WordPress has drawn anything. No error, no warning, no slow query in the log worth noticing. Just a tax on every request.

Measuring it

There is a trap in the usual SQL query you will find online. WordPress 6.6 changed the autoload column from a simple yes/no to a set of values: on, off, auto, auto-on, auto-off. Older rows keep yes and no, and there is no upgrade routine, so a real site has a mix. Querying only for autoload = 'yes' undercounts, sometimes badly.

-- Total bytes loaded on every request.
-- Adjust wp_ if your table prefix is different.
SELECT SUM(LENGTH(option_value)) AS autoload_bytes
FROM wp_options
WHERE autoload IN ('yes', 'on', 'auto', 'auto-on');

-- The worst offenders, largest first.
SELECT option_name, LENGTH(option_value) AS size_bytes
FROM wp_options
WHERE autoload IN ('yes', 'on', 'auto', 'auto-on')
ORDER BY size_bytes DESC
LIMIT 25;

If you have WP-CLI, this is quicker and you do not need database credentials:

# Total size of everything autoloaded, in bytes.
wp option list --autoload=on --format=total_bytes

# Biggest autoloaded options. Note the sort happens in the shell:
# wp option list only sorts by option_id, option_name or option_value.
wp option list --autoload=on --fields=option_name,size_bytes | sort -n -k 2 | tail -25

Site Health flags this too, under Tools then Site Health, once the total crosses core’s threshold. Treat that warning as an audit trigger rather than a number to chase.

Fixing it without breaking anything

Read the list before you delete anything. You are looking for three categories:

• Orphans. Options with the prefix of a plugin that is no longer installed. Safe to delete after a backup.
• Wrongly autoloaded. Settings for a plugin that only ever runs on one admin screen. These should not be autoloaded, but they should not be deleted either.
• Cache data in the wrong place. A plugin storing an API response or an asset map as a permanent option. Usually safe to delete, because the plugin will rebuild it, but check that assumption on staging first.

For the middle category, flip autoload off instead of deleting. Use the WordPress API rather than raw SQL, because a direct UPDATE leaves the object cache holding the old value and you will spend twenty minutes convinced nothing changed:

# Stop autoloading a specific option. Run once, then remove.
wp eval "wp_set_option_autoload( 'some_plugin_bulky_setting', false );"

While you are in there, clear out expired transients. They live in the same table and orphaned ones accumulate quietly, especially on sites that have been through a few plugin migrations:

wp transient delete --expired

Outbound HTTP requests that block your page load

This one is regional and it catches people out badly. WordPress makes server-side HTTP calls during admin requests: core update checks, plugin and theme update checks, the Events and News dashboard widget, and whatever your commercial plugins do to phone home for licence validation.

Those calls are synchronous. If the endpoint is slow to reach from your server, or a firewall is silently dropping the packets rather than refusing them, PHP sits there until the timeout expires. Two plugins doing that with a five-second timeout each is ten seconds of dashboard, and absolutely nothing in the interface tells you why.

Query Monitor’s HTTP API panel shows every one of these with its duration, which is usually enough. To confirm from the server directly:

# How long does the server take to reach the WordPress.org API?
# -w prints the timing, -o discards the body, -s hides the progress meter.
curl -w "%{time_total}n" -o /dev/null -s https://api.wordpress.org/core/version-check/1.7/

If that takes seconds, or hangs, you have found it. For a pure diagnostic, you can temporarily block all outbound HTTP from WordPress and see whether the dashboard snaps back:

// wp-config.php, ABOVE the "stop editing" line.
// DIAGNOSTIC ONLY. This breaks updates, licence checks and
// anything else that calls out. Remove it once you have your answer.
define( 'WP_HTTP_BLOCK_EXTERNAL', true );

// Optionally allow specific hosts back through while testing.
define( 'WP_ACCESSIBLE_HOSTS', 'api.wordpress.org,*.wordpress.org' );

Do not leave that in place as a fix. If outbound connectivity is genuinely the problem, the real solution is at the network layer: fix the firewall rule, fix DNS resolution on the box, or move to a host that does not throttle outbound connections. If you are on shared hosting and cannot influence any of that, a small VPS from somewhere like InterServer will usually behave better than a crowded shared box, purely because you control the network stack.

The dashboard news widget is the one piece here you can just remove, and most teams never look at it:

// In a site-specific plugin, not in a parent theme.
add_action( 'wp_dashboard_setup', function () {
    remove_meta_box( 'dashboard_primary', 'dashboard', 'side' );
} );

admin-ajax.php and the heartbeat

Open the Network tab in dev tools, filter on admin-ajax.php, and leave a dashboard tab sitting idle for two minutes. You will see requests firing on a timer. That is the Heartbeat API, and it powers autosave, post locking, and session expiry warnings. Those are real features and you should not rip them out.

The cost is that each tick boots WordPress, loads every active plugin, runs any handlers hooked into it, and occupies a PHP worker for the duration. The post editor ticks fastest because autosave needs to feel responsive; other admin screens tick more slowly. Multiply by every open tab and every logged-in editor, and on a small server you can spend a meaningful share of your PHP workers on polling.

The proportionate fix is to slow it down rather than kill it:

// Slow the heartbeat down across admin screens.
// Core clamps this to its allowed range, so an out-of-range
// value is quietly ignored rather than applied.
add_filter( 'heartbeat_settings', function ( $settings ) {
    $settings['interval'] = 60;
    return $settings;
} );

Worth being honest about the trade-off: at a longer interval, autosave and post-lock detection get less immediate. On a single-author blog that is invisible. On a newsroom where three people edit the same article, post locking becoming less prompt is a genuine cost and you should leave the editor alone and throttle elsewhere.

Heartbeat is not the only thing hitting that endpoint. Cart fragments, live search, popup builders, notification pollers and bots all target admin-ajax.php. Look at the action parameter in the request payload to see which plugin is responsible, then deal with that plugin rather than blaming the endpoint.

wp-cron riding along on your admin requests

WordPress has no scheduler of its own. It checks for due tasks on page loads and fires them off, which means somebody’s page view pays for your backup job, your feed import and your email queue. On a low-traffic site the person unlucky enough to be that page view is usually you, logged in, clicking around the admin.

# What is scheduled, and is anything badly overdue?
wp cron event list

# Run everything due right now, so you can time it in isolation.
wp cron event run --due-now

A long list of overdue events means cron is not firing reliably, which is its own problem. The fix is to take the scheduler off page loads and give it to the operating system:

// wp-config.php
define( 'DISABLE_WP_CRON', true );

# crontab -e, as the user that owns the WordPress files.
# Every five minutes is enough for most sites.
*/5 * * * * cd /var/www/example.com && wp cron event run --due-now >/dev/null 2>&1

The order matters. Set the constant and the system cron in the same change, because if you disable wp-cron and forget the cron job, scheduled posts stop publishing and nobody notices for a week.

Database bloat, and the list tables that trip over it

Admin list screens do work the front end never does. Counting posts by status for those “All | Published | Draft” links, joining postmeta for sortable columns, building filter dropdowns from distinct values. All of it scales with table size, and none of it is cached.

# Which tables are actually large?
wp db size --tables --human-readable

What usually turns up:

• wp_postmeta far larger than wp_posts. Normal to a point. Suspicious when the ratio is extreme, which usually means a plugin writing meta per page view.
• Revisions. Every save keeps a full copy of the post. Cap them with define( 'WP_POST_REVISIONS', 10 ); in wp-config, which limits new ones without touching existing content.
• Action Scheduler tables on WooCommerce sites. Completed actions accumulate. There is a cleanup screen under WooCommerce tools, and it is worth checking before you assume the store itself is slow.
• Spam and trashed comments still counted by every dashboard widget that shows a comment count.

Two quick wins that need no database work at all. Use Screen Options at the top right of any list table to drop the per-page count from twenty to ten on a slow screen. And switch the Media Library from grid view to list view, because the grid loads far more per scroll.

The server underneath

If the application is clean and the admin is still slow, look down a layer. Site Health covers most of it, under Tools then Site Health then Info.

• No persistent object cache. Without one, every options lookup and every transient read goes to MySQL on every request. Adding Redis or Memcached with the matching drop-in is often the single biggest improvement available to an admin-heavy site, because the admin is exactly the workload that benefits.
• OPcache disabled. PHP recompiling every WordPress file on every request. Free to enable, immediately noticeable.
• An old PHP version. Upgrading a WordPress site’s PHP is usually the cheapest performance work available, and it is a security matter regardless.
• PHP-FPM worker exhaustion. If requests are queuing for a worker, every page waits, and the admin waits longest because it holds a worker for the whole request. Check the pool status and the error log before adding more workers, because a worker shortage is often a symptom of slow requests rather than the cause.
• A low memory limit. The admin needs more than the front end, especially plugin and update screens.

If you run your own server, track admin response time the same way you track front-end response time. Scraping PHP-FPM and MySQL metrics into Prometheus and graphing them in Grafana costs an afternoon and turns “the dashboard feels slower lately” into something you can actually see.

Troubleshooting

Only one admin screen is slow

That points at a specific plugin, not the platform. Query Monitor on that exact screen will name the caller. Common culprits are the plugins list (update checks for every installed plugin) and any settings page that fetches remote data to populate a dropdown.

Slow only for some users

Check user meta. Some plugins store per-user data such as dismissed notices, column preferences or activity logs, and one user’s row can grow enormous. Also check whether the slow users are administrators, since admins load update checks and notices that editors do not.

Fast for a while after clearing cache, then slow again

Something is rebuilding a large transient or option on a schedule and it is expensive. Watch wp_options row sizes over a day, or check the cron list for a job that lines up with the slowdown.

Slow in one browser or on one machine only

Not a server problem. Test in a private window with extensions disabled. Ad blockers and password managers interact badly with some admin screens, and a stale service worker from a caching plugin can serve half-broken admin assets.

Everything looks fine but it is still slow

Bisect on staging, never production. Deactivate all plugins, confirm the admin is fast, then reactivate in halves rather than one at a time. Switch to a default theme too, because functions.php in a commercial theme can do as much work as a plugin.

Common mistakes

Things I would push back on if you suggested them:

• Judging admin performance by front-end speed test scores. Those measure a cached HTML file.
• Installing a second caching plugin because the first one “did not fix the dashboard”. No page cache will ever cache wp-admin.
• Running an UPDATE against the autoload column directly, then wondering why nothing changed. The object cache still holds the old values.
• Only counting autoload = 'yes' and concluding the table is fine.
• Disabling the heartbeat completely, then losing work when two people edit the same post.
• Setting DISABLE_WP_CRON without adding a real cron job.
• Deleting rows from wp_options without a backup, or without checking on staging first.
• Leaving WP_HTTP_BLOCK_EXTERNAL in place because it made the dashboard fast. It also stopped your security updates.
• Adding PHP-FPM workers to hide slow requests instead of finding out why they are slow.
• Deactivating plugins one at a time on a live site during business hours.

Best practices

• Measure with Query Monitor before changing anything, and measure again with it deactivated.
• Check autoloaded option size whenever you install, remove or update a major plugin.
• Remove uninstalled plugins’ leftover rows as part of routine maintenance, not as an emergency.
• Run a persistent object cache on any site where people spend real time in the admin.
• Move wp-cron to a system cron job on every site you manage.
• Cap post revisions rather than deleting them in bulk later.
• Keep a staging copy so bisecting plugins never happens on production.
• Treat Site Health warnings as a starting point for investigation, not a checklist to silence.
• Uninstall plugins properly instead of deactivating them and leaving them installed, since update checks still run for installed plugins.
• Watch admin response time over time, so you catch a slow regression before somebody files a ticket.

FAQ

Why is my WordPress dashboard slow when the site itself is fast?

Because the front end is being served from a cache and the dashboard cannot be. Page caches and CDNs bypass logged-in requests by design, so wp-admin runs the full PHP and MySQL stack on every click. The dashboard is showing you your site’s real uncached performance.

Will a caching plugin speed up wp-admin?

Not the page caching part, no. What can help is the object caching side, if your caching plugin ships one, because that caches option and transient lookups rather than whole pages. Redis or Memcached with the matching drop-in does the same job more reliably.

How much autoloaded data is too much?

Core’s Site Health check will tell you when you have crossed its threshold, and that is the number to work against rather than one from an article. More usefully: if a single option is measured in hundreds of kilobytes, look at it regardless of the total, because one bad row is easier to fix than a general diet.

Is it safe to delete rows from wp_options?

With a backup and a staging test, yes for orphaned rows from plugins you have removed. For anything belonging to an active plugin, turn autoload off instead of deleting, and use wp_set_option_autoload() rather than raw SQL so the object cache stays consistent.

Should I disable the Heartbeat API?

Throttle it, do not disable it. Turning it off entirely breaks autosave and post locking, which is a bad trade for a site with more than one editor. Raising the interval keeps both working and removes most of the load.

Does the number of plugins matter?

Less than people assume. Twenty well-written plugins can cost less than one that runs a remote API call on admin_init. Count what each plugin does per request, not how many are in the list. Query Monitor attributes queries and HTTP calls to specific plugins, which turns this from a guess into a measurement.

Will better hosting fix a slow WordPress admin?

It helps when the constraint is genuinely the server: no OPcache, no object cache, throttled CPU, a shared MySQL instance under load. It does nothing for four megabytes of autoloaded options or a plugin blocking on a remote API. Diagnose first, because moving a slow site to a faster server usually gives you a slightly less slow site and a new bill.

The one thing to remember

Your dashboard is not a separate, badly built part of WordPress. It is the only place you ever see your site running without a cache in front of it, which makes it the most honest performance signal you have. A slow WordPress admin is telling you something true about the application, and the front end has been politely covering for it.

So measure before you change anything, and go in this order: autoloaded options, outbound HTTP requests, admin-ajax traffic, cron, database size, then the server. That sequence puts the highest-yield, lowest-risk checks first, and most of the time you will not get past the second one.

Need someone to find where the time is going?

Diagnosing a slow admin is mostly measurement discipline, and it goes faster with someone who has looked at a lot of these. Work I take on regularly:

• Profiling a slow WordPress admin and reporting back with the actual cause, named, rather than a list of generic tips.
• Cleaning up wp_options and autoloaded data safely, tested on staging before it touches production.
• Setting up Redis or Memcached object caching, OPcache and PHP-FPM tuning on a VPS or dedicated server.
• Moving wp-cron to system cron and fixing scheduled jobs that have quietly stopped running.
• Database maintenance: revisions, orphaned meta, Action Scheduler cleanup on WooCommerce sites, and indexing where it genuinely helps.
• Adding proper monitoring so admin performance regressions show up on a graph instead of in a complaint.

Send me a Site Health info report and a Query Monitor screenshot from your slowest admin screen, and I will tell you what I would look at first.

The post Your Site Is Fast and Your Dashboard Is Not: Fixing a Slow WordPress Admin appeared first on John Nessime.

The good news is that most WordPress problems are not random. They leave clues, and if you know where to look, identifying the root cause becomes much easier.

After managing WordPress servers and troubleshooting websites over the years, one lesson has become obvious: guessing rarely fixes anything. A structured debugging process almost always does.

This guide walks through the practical approach professionals use to diagnose WordPress issues, improve performance, and strengthen website security without creating additional problems.

Why WordPress Problems Happen

WordPress itself is remarkably stable. Most issues originate from the environment around it.

• Plugin conflicts
• Theme compatibility issues
• PHP version mismatches
• Database corruption
• Memory limitations
• File permission problems
• Server configuration mistakes
• Caching conflicts
• Security breaches
• Poor hosting performance

Instead of treating every symptom individually, it’s more effective to understand which layer is actually responsible.

Start With Safe Troubleshooting

Before changing anything, make a complete backup.

A proper backup should include:

• Entire WordPress files
• Database
• Uploads folder
• Configuration files
• Custom themes
• Custom plugins

Working without a backup is one of the biggest mistakes beginners make.

Enable WordPress Debug Mode

WordPress includes a powerful debugging system built directly into the core.

Edit the wp-config.php file and enable debugging.

define('WP_DEBUG', true);
define('WP_DEBUG_LOG', true);
define('WP_DEBUG_DISPLAY', false);

This records PHP warnings and errors inside the debug.log file without exposing them to website visitors.

Never leave debugging enabled permanently on a production website.

Common WordPress Errors Explained

White Screen of Death

The website displays nothing except a blank white page.

Typical causes include:

• PHP fatal errors
• Plugin conflicts
• Memory exhaustion
• Corrupted files

The debug log usually reveals the exact file responsible.

500 Internal Server Error

This generic server error often results from:

• Broken .htaccess rules
• PHP configuration
• File permission issues
• Server resource exhaustion

Checking the Apache or Nginx error logs is usually the fastest path to identifying the real problem.

Database Connection Error

This message means WordPress cannot communicate with MySQL.

Possible reasons include:

• Incorrect database credentials
• Database server unavailable
• Corrupted database tables
• Exceeded hosting limits

Finding Plugin Conflicts

Plugins are responsible for the majority of WordPress issues.

Instead of uninstalling everything randomly:

1. Disable all plugins.
2. Confirm whether the issue disappears.
3. Enable plugins one at a time.
4. Identify the plugin causing the conflict.

This systematic approach saves hours of unnecessary troubleshooting.

Theme Debugging

The active theme can introduce problems through:

• Outdated code
• Poor optimization
• Deprecated PHP functions
• JavaScript conflicts

Temporarily switching to a default WordPress theme like Twenty Twenty-Six quickly determines whether the issue originates from the theme.

Browser Developer Tools

Modern browsers include excellent diagnostic tools.

The Developer Console helps identify:

• JavaScript errors
• Failed network requests
• Slow resources
• CSS conflicts
• Mixed HTTPS content

Many frontend issues become immediately obvious after opening the browser console.

Improving Website Performance

Performance problems are often easier to detect than to solve.

Start by measuring instead of guessing.

Check Page Speed

Review:

• Largest Contentful Paint (LCP)
• Interaction to Next Paint (INP)
• Cumulative Layout Shift (CLS)
• Time to First Byte (TTFB)

These Core Web Vitals provide a realistic picture of user experience.

Optimize Images

• Convert images to WebP
• Resize oversized files
• Compress before uploading
• Lazy load below-the-fold images

Reduce Plugin Bloat

Installing dozens of plugins increases:

• Database queries
• PHP execution time
• JavaScript loading
• Memory consumption

Only keep plugins that provide measurable value.

Use Object Caching

Redis and Memcached dramatically reduce repeated database queries on busy websites.

Database Maintenance

Over time databases accumulate:

• Expired transients
• Spam comments
• Post revisions
• Unused metadata
• Orphaned records

Cleaning these periodically keeps queries efficient.

Server-Level Debugging

Not every issue originates inside WordPress.

Sometimes the operating system is the real culprit.

Monitor:

• CPU usage
• RAM usage
• Disk utilization
• Disk I/O
• PHP-FPM workers
• MySQL performance
• Apache workers
• Nginx requests

Server monitoring often exposes bottlenecks invisible from inside WordPress.

Security Troubleshooting

Performance degradation can sometimes indicate a compromised website.

Watch for:

• Unexpected administrator accounts
• Unknown plugins
• Modified core files
• Suspicious PHP files
• Spam redirects
• Hidden malware

If malware is suspected:

1. Take the website offline if necessary.
2. Create a forensic backup.
3. Scan every file.
4. Replace WordPress core files.
5. Rotate all passwords.
6. Regenerate security keys.
7. Review access logs.

Useful Log Files

Professional troubleshooting relies heavily on logs.

• WordPress debug.log
• Apache error.log
• Nginx error.log
• PHP-FPM logs
• MySQL logs
• Server syslog
• Security audit logs

Learning to read logs is one of the most valuable troubleshooting skills a WordPress administrator can develop.

A Practical Debugging Workflow

1. Reproduce the problem.
2. Check browser console.
3. Enable debug logging.
4. Review server logs.
5. Disable plugins.
6. Switch themes.
7. Verify PHP compatibility.
8. Check database health.
9. Test server resources.
10. Validate the fix.
11. Monitor after deployment.

Following the same workflow every time eliminates unnecessary trial and error.

Preventing Future Problems

The easiest issue to solve is the one that never happens.

Good maintenance habits include:

• Automatic backups
• Routine updates
• Security monitoring
• Uptime monitoring
• Performance dashboards
• Database optimization
• Log reviews
• Staging before production deployments

Preventive maintenance significantly reduces downtime and emergency fixes.

Final Thoughts

Debugging WordPress is less about memorizing error messages and more about following a logical process. Every warning, failed request, or slow query tells part of the story. By collecting evidence instead of making assumptions, you can solve problems faster and with greater confidence.

Whether you’re maintaining a personal blog, managing business websites, or supporting client projects, investing time in understanding debugging techniques pays dividends in stability, performance, and security. A well-maintained WordPress site not only loads faster and ranks better in search engines but also provides visitors with a more reliable and trustworthy experience.

Reliable websites are not built by avoiding problems—they’re built by knowing exactly how to diagnose and solve them when they appear.

The post The Complete WordPress Debugging Handbook: Fix Errors, Improve Performance & Secure Your Website Like a Pro appeared first on John Nessime.